The walk-through WT1000 metal detector provides high-detection performance, and maximum throughput with multi-dimensional scanning. It creates an absolutely uniform magnetic field for detection, thereby eliminating any “hot spots.” Microprocessors in both detection and control circuitry create greater sensitivity for detecting weapons. The built-in multi-coil circuitry minimizes false alarms.
The WT1000 provides high quality, value and proven reliability. It meets the latest requirements of the FAA and other regulatory bodies, as well as all international standards for CEC regulations.
The WT1000 meets or exceeds detection requirements of the National Institute of Law Enforcement and Criminal Justice Standards #0601.00, levels 1-5, and the Federal Aviation Administration Airport Application Specifications. Programs have been designed specifically to meet the three-gun text of the FAA and the requirements of the Undetectable Firearms Act of 1991. The WT1000 complies with IEC standards for safety requirements for electronic measuring apparatus and meets the Federal Communications Commission Class B standards for noise emission from commercial electrical equipment. The WT 1000 confroms to the new European Electromagnetic Compatibility Directive, 89.335.EEC CE.
The peak magnetic field strength of the WT1000 is less than one Gauss and does not affect magnetic recording media, including magntic tape, diskettes and cards. The WT1000 has been tested in accordance to and meets the following electromagnetic safety requirements:
• Institute of Electrical and Electronic Engineers: A Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 Ghz. IEEE C95.1 - 1991 section 4.12
• National Institute of Law Enforcement and Criminal Justice: Standard for Walk-through Metal Detectors for use in Weapon Detection, NILECJ-STD-0601.00 section 4.11
Operating Temperatures
-4°F (-20°C) to +158°F (70°C)
Humidity
To 95% non-condensing
Power
100 to 240 VAC, 50/60 Hertz, 5 watts. Power supply meets UL, CSA, TUV and VDE standards
Weatherproofing
Meets IP 31, IEC standard: “degrees of protection provided by enclosures,” CEI 529.
Infrared Sensor
Improves analysis of detection signals. Increases throughput and reduces “false alarms”.
Tamper-proof
Dual-level access codes required to set all sensitivity settings and detection programs.
Construction
Attractive scratch-resistant laminate with resilient end caps. Heavy-duty aluminum.
Control Output
Solid-state switches for operating external alarms and control devices.
Traffic Counter
Built-in and resettable. Current reading displayed on LCD panel.
Synchronization
Multiple frequencies permit several units to operate simultaneously in close proximity to one another.
Self-diagnostics
Self-test of all systems is automatically performed at power up. Any failure or problem is reported on LCD display.
Alarm
Red light (visual) above the vertical bars indicates amount of metal.
Sensitivity
1-200 per program for precise target selection.
Program Level
Twenty standard programs designed to fullfill various secuirity applications.
Dimensions
Passage Interior: 30” (W) X 80” (H) X 23” (D), 0.76 m X 2 m X 0.58 m Overall Exterior: 35” (W) X 87” (H) X 23” (D), 0.9 m X 2.2m X 0.58 m (D) Shipping: 35” (W) X 87” (H) X 23”, 0.9m (W) X 2.3 m (H) X 0.16 m (D)
Weight
Overall Exterior: 115 lbs., 52 kg. Shipping: 139 lbs., 63 kg.
Warranty
24 months, parts and labor
